The development of the automobile industry puts higher and higher requirements on automobile lighting, and car light mould is one of the more difficult parts. Automobile lighting does not know to be safe but also needs to meet other requirements, such as the appearance of the car. Blended into one, beautiful and practical, etc.

　　A good car light mould structure design is one of the prerequisites for the manufacture of a qualified mould. Our company’s technical department has 10 professional mould structure designers and product stylists, all of whom have more than 5 years of work experience. Analyze all aspects of the product structure (including mold flow analysis, mold release angle, product surface microcosm, gating system design, exhaust system design, cooling system design, etc.) These molds are also prone to problems The mold structure design will be repeatedly verified.

　　The second prerequisite for qualified mold manufacturing is the selection of mold materials. Commonly used mold steels are 45#, 40Cr, P20, 2738, 2316, 718, NAK80, H13, S136, and so on. According to the customer's mold use requirements and life requirements, we can advise customers on the choice of mold steel.

　　The technical requirements for car light mould are as follows:

　　1. Analyze the product molding process, mold structure, and manufacturing process. Ensure that the life of the mold meets the requirements of the customers.

　　2. Design complete mold structure and processing parts, and put forward assembly requirements and injection molding process requirements.

　　3. Before opening the mold, fully analyze the appearance quality defects (such as shrinkage, etc.) or mold structure problems (such as parting surface setting, gate setting, and inability to guarantee mold life).

　　4. Mold appearance: The appearance of mold must be free of rust, bumps, and lack of defects in modules.

　　5. Mold transportation: mold transportation must be equipped with a clamping piece, the packaging is firm and rust-proof.

　　6. Mold information: At the same time as the mold is delivered, a complete set of mold wearing parts and maintenance reference materials are provided.