EN
English
简体中文
EnglishThe production of plastic injection mould is an extremely complex and difficult operation process, which includes professional knowledge in many fields such as chemistry and physics, so be careful. If you are not careful, many mistakes will occur, resulting in many loopholes in the production process, affecting the normal working efficiency of production and processing.
Next, the editor will explain to you the points that need to be paid attention to in the processing of plastic Injection mould.
1. Clean the mold thimble during the production of the plastic injection mould
The life of the ejector pin for cleaning the mold is one year. If the cycle exceeds one year, the thimble will become dirty on the surface due to gas build-up and mold impurities. Timely cleaning is recommended. After cleaning, we recommend applying a coat of lubricating oil to the surface for isolation.
2. Mould forming cycle in plastic Injection mould production
This cycle includes injection time and product cooling time. How control the production time of these two modules is particularly important, which is directly related to the quality of the product.
3. The injection speed of plastic in the production process of plastic injection mould
Because plastic Injection of car parts mould simply means injecting glue into the mould, the speed of glue injection is particularly important. The injection speed directly affects the shape of the product after molding.
+86-576-84616809
+86-576-84616810, +86-18721333812
www.chinaautomould.com
No.12 Jinniu Road, Huangyan, Taizhou City